Τυχαίες αποσυνδέσεις σε 3G modem (Huawei E220, E170)

Ιστορικά στοιχεία και βιώματα τεχνολογικής εξέλιξης στο τηλέφωνο, την ασύρματη επικοινωνία και τον ηλεκτρονικό υπολογιστή.
Απάντηση
Άβαταρ μέλους
GeorgeVita
Διαχειριστής
Δημοσιεύσεις: 624
Εγγραφή: 04 Σεπ 2013, 21:51
Ονομα: Γιώργος
Επικοινωνία:

Τυχαίες αποσυνδέσεις σε 3G modem (Huawei E220, E170)

Δημοσίευση από GeorgeVita »

Τυχαίες αποσυνδέσεις σε 3G modem (Huawei E220, E170)

Μπορεί σήμερα όλοι να απολαμβάνουμε το "internet παντού" και να θεωρούμε ότι η αποσύνδεση του τερματικού μας (τηλέφωνο, 3G modem, tablet) θα γίνει μόνο αν εμείς το επιλέξουμε, αλλά ΔΕΝ ήταν πάντα έτσι!

Εικόνα

Πριν μερικά χρόνια, το 2008, όταν η Cosmote προωθούσε το "Internet on the Go", τα διάσημα τότε 3G modems της Huawei (E220 και E170) είχαν τακτικές αποσυνδέσεις. Η τεχνική υποστήριξη της Cosmote δεν μπορούσε να βοηθήσει. Οι περισσότεροι νομίζαμε ότι πρόκειται για πρόβλημα στο λειτουργικό, το καλώδιο USB, την ικανότητα ρεύματος τροφοδοσίας του modem από το PC (έδιναν μαζί και βύσμα Υ για "διπλό" ρεύμα από δύο θύρες USB), κλπ.

Το ίδιο έπαθα και εγώ γύρω στο Πάσχα του 2008. Αφού δεν έβγαζα άκρη με την τεχνική υποστήριξη (ήταν πολύ νέο προϊόν), θεώρησα ότι φταίει το Windows driver. Συζητώ με τον tsakf που πρότεινε δοκιμή με linux. Η δοκιμή σύνδεσης 3G modem με Ubuntu 8.04 είχε παρόμοια αποτελέσματα. Κέρδισα την εμπειρία χρήσης ενός καλύτερου λειτουργικού συστήματος...

Η συνδρομή του mobile internet ήταν τσουχτερή, τα δεδομένα έρχονταν αρκετά αργά και η σύνδεση ήταν ασταθής (τυχαίες αποσυνδέσεις με ήχο "συνδέθηκε-αποσυνδέθηκε" ένα περιφερειακό USB).

Σκέφτηκα: Μήπως είναι θέμα hardware;

Τα παίρνω όλα κοντά στον πάγκο μου. Εφτιαξα μια προέκταση USB με ανοικτές επαφές στο ένα βύσμα, έκανα σύνδεση με το 3G modem και παρατήρησα στον παλμογράφο μεγάλο ripple στην τάση τροφοδοσίας. Μετά από λίγο η σύνδεση διακόπηκε. Εφτιαξα ένα καλώδιο Y για ανεξάρτητη τροφοδοσία από το εργαστηριακό τροφοδοτικό μου, έκοψα το V+ του καλωδίου που πήγαινε στο PC (για να μη κάψω το motherboard) και έκανα τη σύνδεση με τον Cosmote.
ΟΛΑ ΤΕΛΕΙΑ! Ταχύτητα στο μέγιστο και σταθερότητα σύνδεσης όλες τις ώρες που το άφησα να λειτουργήσει.
Πάω πίσω στην προέκταση USB, παίρνω ένα κομμάτι πολυτρυπημένης πλακέτας, Βάζω μερικούς πυκνωτές παράλληλα στην τάση τροφοδοσίας, βυσματώνω το modem, συνδέω το καλώδιο USB στο PC (χωρίς εξωτερική τροφοδοσία) και ... ΟΛΑ ΤΕΛΕΙΑ!

Εικόνα

Επιπλέον κέρδος η δυνατότητα απομάκρυνσης του 3G modem από το σώμα μου. Δοκίμασα με καλώδιο μήκους 5 μέτρων. Πάλι ΟΛΑ ΤΕΛΕΙΑ!

Οταν αργότερα διάβασα το άρθρο του EPN "Stay Active: Selecting the Right Passive" by Mark Osborne, NIC Components ή αλλιώς ... "Don't forget the capacitor!", λέω άντε τώρα να το πούμε και στην Huawei...

Ευτυχώς η Huawei είχε δημιουργήσει ανοιχτό forum για κάθε χρήστη. Στην αρχή γράφτηκα για να βρω μια λύση στο πρόβλημα, λ.χ. ένα driver για τα windows, αλλά μάταια. Αφού είχα καταφέρει να συνδεθώ με το E170 στο Ubuntu, κοινοποίησα τις ρυθμίσεις:
E170 : how to setup Ubuntu 8.04 hardy (debian linux os) for E170 usb stick

Για την λύση στο πρόβλημα h/w δημιούργησα ένα νέο θέμα:
E220 & E170 : disconnection problem solved (h/w)

GeorgeVita (General User, Posts: 33, Expert Points: 0, Useable Points: 10000, Registered: Jul 16, 2008)

Subject: E220 & E170 : disconnection problem solved (h/w)
Posted: 2008-09-14 03:50

This thread refers to the 'randomly' disconnects of USB broadband modems as E170, E220. The disconnections are like a physical removal of the modem from the USB port. This problem is caused by a h/w reason on the USB power supply, so the solution is an external hardware patch.

Note that I am a user of an E170 modem which is my sole internet connection for business and personal use. I signed a contract with a local mobile broadband provider, they gave me the E170 and ... the problems started!

You can read the full story (which is similar to those others) at my posts:
http://forum.huawei.com/jive4/thread.js ... dID=323238
http://forum.huawei.com/jive4/thread.js ... dID=321295

Finally I have my problem SOLVED with an external electronic 'patch'. After this fix, I am fully satisfied with my modem and believe that this is a good product. I can be 'always connected browsing or downloading for hours with speeds up to 4Mbits/s (download)' using a small 'patched' cable or a 5 meters 'patched' USB extension cable (not repeater or USB hub). I did not change any driver, application s/w or the modem's firmware.

Recently I contact another user of the forum.huawei.com with a similar h/w disconnecting problem on an E220 modem and we SOLVE it:
http://forum.huawei.com/jive4/thread.js ... dID=323536

This h/w patch is to add some capacitors on the USB power line, 'filtering and reserving' DC voltage for the 3G transmitter preventing the digital disconnection from the USB port. This patch must be done by a technician because we don't want to 'short circuit' any cable!

Of course more typical and preferable for the customer is to have this fix at 'no cost' from the PC or the MODEM manufacturer because it is an extreme incompatibility issue at the USB interface. Two months after solving the problem I found an article for electronics engineers (Huawei designers may have read it) with the conclusion ... don't forget the capacitor! Read it at:
http://www.epn-online.com/page/new58312 ... ssive.html

----------

CONCLUSION (from my point of view and for my own case)

Problem is: reset or 'brown out state' of the modem

Caused by: USB power ripple/spikes when modem transmits a lot of data, or at high power (other possible reason: a USB connector malfunction like tremble, crack, dirt etc.)

H/W Solution by the user: contact an electronics technician to add capacitors externally (on a patched cable) 'filtering' the ripple spikes (first check and clean the USB connectors)

H/W Solution by the PC manufacturer: Do better design on the USB port to supply a 'good & steady' power for new advanced USB peripherals (as USB mobile broadband modems)

H/W Solution by Huawei: Add decoupling capacitors or split the power lines of the CPU, USB I/O and GSM/3G circuits to prevent resets and brown outs at difficult (for the circuit) situations.

S/W Solution at firmware: Sorry NOT available, ... or possibly a new firmware could 'amplitude modulate' the RF-TX signal to smooth the rise and fall of the RF PWR OUT at every data burst (true artificial intelligence), or change the threshold of the reset and brown out detect circuits to lower levels which may degrade the total performance of the circuit.

S/W Solution at driver: Sorry NOT good, ... or a new s/w driver could see the disconnects and try to reconnect and if not succeed would restart the computer, etc. I am not joking. Programmers are trying to use E220 for a 'reliable' application:
http://ubuntuforums.org/showthread.php?t=914024

----------

SERIOUSLY the above could solve at least the following threads (which are carefully determined as 'the same problem'):

SOLVED AT:
- E220 disconnecting
. http://forum.huawei.com/jive4/thread.js ... dID=323536

Other case SOLVED by a 'replacement' modem!
- E172 disconnects - massive stability problems
. http://forum.huawei.com/jive4/thread.js ... dID=321438

MAY SOLVE:
- E220 looses power?
. http://forum.huawei.com/jive4/thread.js ... dID=319534

- E220: the connection aborts unregularily
. http://forum.huawei.com/jive4/thread.js ... dID=322459

- E220 Mac woes...
. http://forum.huawei.com/jive4/thread.js ... dID=322248

- E170 constantly crashing
. http://forum.huawei.com/jive4/thread.js ... dID=321295

- E169 Strange connection drops in Vista
. http://forum.huawei.com/jive4/thread.js ... dID=323238

- mobile broadband usb device disconnects
. http://forum.huawei.com/jive4/thread.js ... dID=323555

POSSIBLY SOLVES:
- E 172 crash problem on mac os x 10.5.1
. http://forum.huawei.com/jive4/thread.js ... dID=322460

- E220 disconnects all the time (post of user 'Prosessor')
. http://forum.huawei.com/jive4/thread.js ... dID=321470

Regards
George

P.S.: I cannot offer the cable or the patch, just sharing my experience.
Πολλοί χρήστες των modem επιβεβαίωσαν την λύση του προβλήματος!

Το πιθανό "σημαντικό" σχόλιο στο θέμα μου ήταν από εργαζόμενο της Huawei που μου ζήτησε και του έστειλα τεχνικό περιγραφικό σημείωμα με email:
z00134964, Huawei Staff, Posts: 418, Expert Points: 600, Useable Points: 10700, Registered: Jul 10, 2008
Subject: Re: E220 & E170 : disconnection problem solved (h/w)
Posted: 2008-11-20 11:31
Hi,GeorgeVita
I am very interested for your excellent draft.Can you send your clear draft to my email
"mail to: xyz12345 @ huawei.com"
I will check this solution if it really works.
Great thanks!
Αρκετοί με προσέγγισαν για να αγοράσουν το "GeorgeVita's cable patch for 3G modem" το οποίο ΔΕΝ πωλούσα, οπότε έφτιαξα μια ιστοσελίδα "Κάν' το μόνος σου (DIY)": http://www.acomelectronics.com/GeorgeVi ... _foto.html

Εικόνα

Μετά από δοκιμές στα επίπεδα τάσεως που λειτουργούν τα USB 3G modems, έφτιαξα μια απλούστερη προσέγγιση με δίοδο schottky και μικρότερους πυκνωτές. Η λίγο χαμηλότερη τάση τροφοδοσίας δεν δημιουργεί πρόβλημα:

Εικόνα

Τα επόμενα χρόνια κυκλοφόρησαν οι επεκτάσεις καλωδίου USB με τροφοδοτικό, τα 3G modem και οι φορητοί υπολογιστές σχεδιάστηκαν σωστότερα και ... δεν έχουμε πια τυχαίες αποσυνδέσεις λόγω προβλημάτων τροφοδοσίας.

Υ.Γ. το forum της Huawei κάπου έχει χαθεί, έτσι η ανάκτηση των στοιχείων έγινε από το WayBack Machine
Απάντηση

Επιστροφή στο “Πως φτάσαμε ως εδώ!”